March 2014 Part of the Month

This 3 1/2” X 4” part is made of .187 thick HRPO (Hot Rolled Pickled Oil) material. The manufacturing operations are 2 Blanks, Pierce, Deburring, Form, Weld, and Black E Cote Finish. Approximate tooling charge is $4,100.00 with 500 pieces costing approximately $4.50 ea.

February 2013 Part of the Month

This 7 ½” X 3 ½” part is made of .090 thick HSLA ( High Strength Low Alloy) Grade 50 material.  The manufacturing operations are 2 Blank/Pierce, 1 Blank, 2 Forms, Deburring, and Weld.  Approximate tooling charge is $3,500.00 with 5,000 pieces costing approximately $2.15 ea.

November 2012 Part of the Month

This 6 ¾” X 6” part is made of .120 thick HRPO (Hot Rolled Pickled Oil) material.  The manufacturing operations are Blank/Pierce, deburr, Stencil, 3 forms, 3 spot weld, and zinc & yellow trivalent finish. Approximate tooling charge is $5,000.00 with 2,500 pieces costing approximately $3.65 each.

August 2012 Part of the Month

  This 12” X 5 1/2” part is made of .104 thick HSLA (High Strength Low Alloy) Grade 50 material.  The manufacturing operations are 2 Blank/Pierce, 3 forms, weld, and 8 weld nuts. Approximate tooling charge is $4,900.00 with 5,000 pieces costing approximately $9.00 ea.    

June 2012 Part of the Month

Agricultural Industry. This 7.10X7.90 part is made of .120 thick HPRO (Hot Rolled Pickled Oil) materials. The manufacturing operations are Blank/Pierce, Stencil, 2 forms, Deburring, Welding/ Bushing 2X, Spot Weld nut 2X, ream, and Zinc & Yellow chromate finish. Approximate tooling charge is $4,700.00 with 1,000 pieces costing approximately $7.25 each.