Parts of the Month

Image of High Strength Low Alloy Parts

May Part of the Month

This High Strength Low Alloy part is approximately .179” thick X 5” wide X 8” long. The operations to manufacture this part are 1 laser operation, 1 blank and pierce operation, 1 blank operation, 4 forming operations, 2 welding operations, and 3 deburring operations. The part gets a clear zinc finish.

April 2023 Part of the month

April 2023 Part of the Month

This high strength low alloy part is approximately 4” wide X 6.5” long X .120” thick. The operations used to make this part are 1 blank and pierce operation, 2 form operations, 1 deburr operations and 1 spot weld operation.

March Part of the Month 2023 Hot rolled

March 2023 Part of the Month

This hot rolled pickled and oiled part is approximately 13” long X 9” wide and .312’ thick. The operations to manufacture the part are 1 laser operation, 1 tumbling operation, 3 forming operations, 2 welding operations, and 1 machining operation.

February Part of the Month 2023 hot rolled pickled

February 2023 Part of the Month

This hot rolled pickled and oiled part is approximately 4” long X 4” wide X .236” thick. The operations it takes to make the part are 1 blank and pierce operation, 2 forming operations, 1 deburring operation, 1 machining operation, and 1 welding operation. The part has a zinc finish.

December part of the month. This hot rolled pickled and oiled part is approximately .075” Thick by 3” long by 4”wide

December 2022 Part of the Month

This hot rolled pickled and oiled part is approximately .075” Thick by 3” long by 4”wide. The operations to make this part are 1 blanking operation, 1 piercing operation, 1 sanding operation, 4 forming operations, 1 welding operation and is finished with a clear zinc finish.

1 2 3 27

Ready to Connect?

We look forward to quoting your future requirements and thank you for allowing Clow Stamping Company to serve your needs.