Parts Of The Month | Metal Parts & Components | Clow Stamping | Page 19

May 2015 Part of the Month

This 3” X 3 1/2” part is made of .180 Thick HSLA Grade 50 (High Strength Low Alloy) material. The manufacturing operations are Blank/Pierce, Deburring, Machining, 2 Weld, and Zinc Finish. Approximate tooling charge is $2,800.00 with 500 pieces costing approximately $5.05 ea.

April 2015 Part of the Month

This 6 1/2” X 2 1/2” part is made of .134 Thick HRPO (Hot Rolled Pickle Oil) materials. The manufacturing operations are Blank/Pierce, Deburring, 2 Forms, 2 Clinch studs, and Black Powder Coat Finish. Approximate tooling charge is $3,200.00 with 500 pieces costing approximately $3.35 ea.

March 2015 Part of the Month

This 8” X 3 1/2” part is made of .134 Thick HRPO (Hot Rolled Pickle Oil) materials. The manufacturing operations are Blank/Pierce, Deburring, 3 Forms, 2 Hardware, and Charcoal Grey Powder Coat Finish. Approximate tooling charge is $2,500.00 with 1,000 pieces costing approximately $2.50 ea.

January 2015 Part of the Month

This 12” X6” part is made of .104 thick HSLA Grade 50(High Strength Low Alloy) material. The manufacturing operations are Blank, Pierce, 4 Forms, Deburring, and 3 Spot Welds. Approximate tooling charge is $4,200.00 with 2,500 pieces costing approximately $2.70 ea.

November 2014 Part of the Month

This 7” X 5” part is made of .164 Thick HRPO (Hot Rolled Pickled Oil) material. The manufacturing operations are Blank/Pierce, Deburring, 2 Forms, Stencil, 3 Spot Weld, and Yellow Trivalent finish. Approximate tooling charge is $1,900.00 with 250 pieces costing approximately $3.20 ea.

Ready to Connect?

We look forward to quoting your future requirements and thank you for allowing Clow Stamping Company to serve your needs.